Xerox pro 16p User Guide
17
Making Copies on the Automatic Document Feeder
The Automatic Document Feeder (ADF) allows you to automatically make single-sided or two-
sided copies. The ADF holds up to 30 originals (20 lb/80 gsm). Ensure originals are in good
condition, and that all staples and paper clips have been removed. Use the document glass to
make copies from transparencies, facsimile paper, or originals having other unusual
characteristics. For reliable copying operation, use originals within the following ranges:
sided copies. The ADF holds up to 30 originals (20 lb/80 gsm). Ensure originals are in good
condition, and that all staples and paper clips have been removed. Use the document glass to
make copies from transparencies, facsimile paper, or originals having other unusual
characteristics. For reliable copying operation, use originals within the following ranges:
Paper weight range: 16 to 24 lb/60 to 90 gsm
Paper size range: 5.5
×
8.5"/A5 (Short Edge feed only)
8.5
×
11"/A4 and 8.5
×
14"/216
×
353 mm
The ADF comes from the factory with the Auto Start feature disabled. Refer to Customizing
Your Pro 16p section of this User Guide for information about changing this setting.
Your Pro 16p section of this User Guide for information about changing this setting.
1. Select the required paper tray.
2. Select the desired copy features from the control panel.
•
The maximum copy quantity is 100 for 1-sided output
and 1 for 2-sided output. Reinsert the originals into
the ADF for multiple copies of 2-sided output.
and 1 for 2-sided output. Reinsert the originals into
the ADF for multiple copies of 2-sided output.
3. Adjust the paper guide to the original size.
Note: Writing that is very close to the leading or trailing
edge of the original may not copy. Turning the original
around in the ADF may help.
edge of the original may not copy. Turning the original
around in the ADF may help.
4. Insert up to 30 originals face up into the ADF until the
green ADF light on the copier diagram comes on.