Xerox x2 tech User Manual

 

Your system has been designed and tested to meet strict safety 
requirements.  These include safety agency examination and 
approval plus compliance with established environmental 
standards. 

 

 

Follow all warnings and instructions marked on or supplied with 
the product. 

Unplug the units from the wall outlet before cleaning the exterior.  
Always use materials specifically designated for the ColorgrafX 
X2.  Use of other materials may result in poor performance and 
could create a hazardous situation. 

Do not use aerosol cleaners.  Follow the instructions in this 
operator guide for the correct cleaning methods. 

Never use supplies or cleaning materials for purposes other than 
what they were intended.  Keep all supplies and materials out of 
the reach of children. 

Do not use the units near water, wet locations, or outdoors. 

The components of this product are equipped with a three-wire, 
grounding-type plug (i.e., a plug having a grounding pin).  This 
plug will only fit into a grounding-type power outlet.  This is a 
safety feature.  To avoid the risk of electric shock, contact your 
electrician to replace the receptacle if you are unable to insert 
the plug into the outlet. 

Never use a ground adapter plug to connect the system to a 
power source that lacks a ground connection terminal. 

This system should be operated from the type of power source 
indicated on the marking label.  If you are not sure of the type of 
power available, consult your local power company. 

The power supply cord is the disconnect device for this 
equipment.  Make sure that the installation is near the socket 
outlet and is easily accessible. 

Do not allow anything to rest on the power cord.  Do not locate 
the units where someone will step on the cord. 

The units should not be placed in a built-in installation unless 
correct ventilation is provided.