Xerox xi70c User Guide

the print queue by double clicking your
WorkCentre printer icon.

•

  Change the speed and quality of your print

job: Best (Quality) is the slowest setting but
has the highest quality. Draft is the fastest
setting and has the lowest quality.

•

  When you print on transparency film and

photo paper or if the Dry Delay Time is
activated, the printing process is slower, to
allow the ink to dry.

•

  If you selected the wrong paper type, it may

slow down the print process.  Select the
paper type setting that corresponds to the
content of the input tray OR remove the
paper currently in the input tray and load
that corresponding to the paper type
setting.

No pages copied/
Blank page copied

•

  Make sure the protective tape covering the

cartridge nozzle is removed.

•

  Make sure the document you are copying is

placed print-side down on the document
glass.

•

 Check 

Problems with Print in

Troubleshooting section.

Settings made on control
panel are not retained when
the Clear/Stop button is
pressed or when the
WorkCentre is switched on

To save your current settings as defaults:

•

  Press the Tools Menu button until “Set

Defaults” appears.

•

  Choose the appropriate settings using the

navigation buttons on the front panel.

•

  Press OK button to memorize the settings.

•

  Press EXIT button.

The control panel light indicators will now show
the settings you have made.

Copying job is taking too long

•

  If a document is printing, your copy job will

be queued, and will start after the print job
is finished.  The LCD indicates that the
WorkCentre is printing.

•

  Change the speed and quality of your copy

job: Best is the slowest setting but has the
highest quality.  Draft is the fastest setting
and has the lowest quality.

•

  When you copy on to transparency and

photo paper or if the Dry Delay Time is
activated, the copy process is slower.

•

  Check to make sure you have selected

color or black/white copies. Color copies