Xerox xe88 User Guide
7.10
U s e r G u i d e
R E P L A C I N G T H E D R U M C A R T R I D G E
Gently insert the toner cartridge inside
the WorkCentre.
the WorkCentre.
Push where indicated (in the illustration)
until the toner cartridge is fully inside the
WorkCentre and the handle springs back.
until the toner cartridge is fully inside the
WorkCentre and the handle springs back.
Ensure that the WorkCentre power is on.
You must hold in the button indicated and
close the cover at the same time.
Continue to hold the button for three
seconds, then release the button. The
three Copy Contrast LEDs will flash and
return to ready state. If the J2 code is still
present, repeat this step.
You must hold in the button indicated and
close the cover at the same time.
Continue to hold the button for three
seconds, then release the button. The
three Copy Contrast LEDs will flash and
return to ready state. If the J2 code is still
present, repeat this step.
12
13
1
2
14
Xe88qrg.bk Page 10 Thursday, February 17, 2000 4:25 PM