Gestetner 1045 Operating Guide

Confidential Transmission

7

If you do not want your message to be
picked up casually at the other end,
use this feature. The message will be
stored in memory at the other end
and will not be printed until an ID is
entered.

Preparation
If you install the optional Expan-
sion Memory or Hard Disk option,
program the Confidential ID. 

There are two types of Confidential
Transmission:

❖

❖

❖

❖ Default ID

The other party can print the mes-
sage by entering the Confidential
ID programmed in their machine.

❖

❖

❖

❖ ID Override

Should you wish to send a confi-
dential message to a particular per-
son at the other end, you can
specify the Confidential ID that
person has to see that message. Be-
fore you send the message, do not
forget to tell the intended receiver
the ID that must be entered to
print.

❒ The destination machine must be

of the  same make  and  have the
Confidential Reception feature.

❒ The destination machine must

have enough memory available. 

❒ We recommend that you program

the Confidential ID beforehand.

❒ An ID can be any 4 digit number

except 0000.

❒ When the machine is not the same

make, you can use Confidential
Transmission using "SUB Code".

A

B

The Transmission Mode menu ap-
pears.

C

ND1X01E5

Transmitter

Receiver