Gestetner c7006dw Operating Guide

Troubleshooting

44

❒ The optional Network Interface Board is required to acquire printer informa-

tion over the network.

You can check the printer's current status using the following method.

❖

Use the status command.

For more information about the printer configuration with this method,
see the “Operating Instructions” for the optional Network Interface Board
included as a PDF file on the CD-ROM.

Call Service

There is a malfunction in 
the printer.

Turn the printer off and on.

Charger : Not Set Correctly The charger is not set cor-

rectly.

Set the charger correctly. 

Energy Save Mode

The printer is in Energy 
Saver mode.

Wait for a while.

Error Power Off/On

There is malfunction in the 
printer.

Turn the printer off and on.

Front Cover Open

The front cover is open.

Close the front cover. 

⇒

 the 

"Setup Guide" that comes 
with the printer

Fusing Oil is Low

Fuser oil is low. You can 
print about 200 pages more 
after this message appears.

Replace the fuser oil bottle. 

Fusing Oil is Empty

The fuser oil bottle is emp-
ty.

Replace the fuser oil bottle. 

Fusing Unit: Not Set Cor-
rectly

The fusing unit is not in-
stalled in the printer.

Contact your sales or ser-
vice representative.

Left Cover Open

The left cover is open.

Close the left cover. 

⇒

 the 

"Setup Guide" that comes 
with the printer

Loading Toner

The toner cartridge is being 
prepared for replacement.

Wait for a while.