Gestetner c7006dw Operating Guide

Printer Does Not Print

49

Is the power on?

If not, confirm that the power cord is securely plugged 
into the power outlet and the printer. 

Turn on the printer. 

⇒

 the "Setup Guide" that comes with 

the printer

Does the On Line indica-
tor stay on?

If not, press {

} to make it light up.

Does the Error indicator 
stay red?

If so, check the error message on the panel display and 
take the required action. 

Is the paper set?

Load paper into the paper tray or on the bypass tray. 

Is the specified paper size 
correct? 

Set the specified paper size in any of the input trays.

Is the specified paper type 
correct? 

Set the specified paper type in any of the input trays.

Is the interface cable be-
tween the printer and the 
computer connected se-
curely? 

Connect the interface cable properly. If there are any con-
nectors or screws, confirm that they are fastened securely.

For more information about the settings, see the "Quick 
Installation Guide".

Are you using a correct in-
terface cable?

The type of interface cable you should use depends on the 
computer. Be sure to use the correct one. 

If the cable is damaged or worn, replace it with a new one.

For more information about the settings, see the "Quick 
Installation Guide".

Did you connect the inter-
face cable after turning on 
the power switch? 

Connect the interface cable before turning on the power 
switch.

When you print using the 
RICOH-SCRIPT2 printer 
driver in a network, data 
is received by the printer, 
but is not printed.

❖

On the 

 tab of the Printer Properties, click 

 and then clear both 

 

and 

.

❖

On the 

 tab of the Printer Properties, se-

lect 

 for both 

 and 

.

❖

Open the 

 tab of the Printer Properties. From 

, select 

 for both 

 and 

.