Gestetner c7528 Installation Guide
G1307525_1.00
Copyright ©
2005
48
Installing Options
Available Options
This section describes how to install options.
By installing options, you can improve the printer performance and have an ex-
panded variety of features to use. For the specifications of each option, see
Maintenance Guide.
panded variety of features to use. For the specifications of each option, see
Maintenance Guide.
❒ The voltage rating of the connector for options is 24 V DC or less.
Option List
The following is a list of options for this printer. Some printer models come with
the expansion Hard Disk Drive and the duplex unit attached as default.
the expansion Hard Disk Drive and the duplex unit attached as default.
• Before installing options, the machine should be turned off and unplugged
for at least an hour. Components inside the machine become very hot, and
can cause a burn if touched.
can cause a burn if touched.
• Before moving the machine, unplug the power cable from the outlet. If the
cable is unplugged abruptly, it could become damaged. Damaged plugs or
cables can cause an electrical or fire hazard.
cables can cause an electrical or fire hazard.
• When lifting the machine, use the grips on both sides. The machine could
break or cause an injury if dropped.
Basic model printer
Duplex unit standard mod-
el printer
Paper Feed Unit Type 7300 (500
× 1)
Paper Feed Unit Type 7300 (500
× 2)
Paper Bank Type 7300
SR960 (2 Tray Finisher)
SR950 (Booklet Finisher)
Duplex Unit Type 7100
Printer Hard Disk Type 7100
Memory Unit Type C (SDRAM mod-
ule)
ule)
Gigabit Ethernet Type 7300
IEEE 802.11b Interface Unit Type H
IEEE 1394 Interface Board Type B
Bluetooth Interface Unit Type 3245