Gestetner c7528 Operating Guide

Monitoring and Configuring the Printer

233

❖ Route Flush

msh> route flush

❒ The maximum number of routing tables is 16.
❒ Set a gateway address when communicating with devices on an external net-

work.

❒ The same gateway address is shared by all interfaces.

set

Use the “set” command to set the protocol information display “active” or “inac-
tive”.

❖ View settings

The following command displays protocol information (active/inactive).

msh> set tcpip

msh> set appletalk

msh> set netware

msh> set smb

msh> set scsiprint

• scsiprint is available when the optional IEEE 1394 interface board is in-

stalled.

msh> set ip1394

• ip1394 can be specified only when the IEEE 1394 interface is installed.

msh> set pictbridge

• pictbridge can be specified only when the pictbridge is installed.

msh> set protocol

• When protocol is specified, information about TCP/IP, AppleTalk, Netware,

and SMB appears.

msh> set lpr

msh> set ftp

msh> set rsh

msh> set diprint

msh> set web

msh> set snmp

msh> set ssl

msh> set nrs

msh> set rfu

msh> set ipp