Gestetner c7528 Operating Guide
Direct Printing from a Digital Camera (PictBridge)
142
PictBridge Printing
Follow the procedure below to start PictBridge printing on this machine.
A
Check the printer and the digital camera are both switched on.
B
Connect a USB cable between the optional USB host interface board in-
stalled on the print and the digital camera.
stalled on the print and the digital camera.
The Data In indicator on the printer blinks for several seconds and "PctBrdg"
is displayed on the printer. This indicates the printer recognizes the digital
camera as a PictBridge device.
is displayed on the printer. This indicates the printer recognizes the digital
camera as a PictBridge device.
❒ Some digital cameras require settings for manual PictBridge operation. For
details, see your digital camera's manual.
C
On your digital camera, select the images you want to print, and specify
the printing conditions.
the printing conditions.
❒ Since printing conditions are specified on the digital camera, specifiable
parameters depend on the particular digital camera. For details, see the
digital camera's manual.
digital camera's manual.
D
The printer receives settings from the digital camera and starts printing.
❒ Do not disconnect the USB cable while data is being sent. If you do, print-
ing will fail.
To stop data printing, see