Gestetner c7528 Operating Guide
Monitoring and Configuring the Printer
239
msh> snmp v3trap {1- 5}
• If a number from 1-5 is entered, settings are displayed for that number only.
❖ Configuring a sending address for SNMP v3 TRAP
msh> snmp v3trap {1-5} {ip| ipx} address
❖ Configuring a sending protocol for SNMP v3 TRAP
msh> snmp v3trap {1-5} active {ip/addr | ipx} {on | off}
❖ Configuring a user account for SNMP v3 TRAP
msh> snmp v3trap {1-5} account account_name
• Enter an account name using up to 32 alphanumeric characters.
❖ Deleting an SNMP v3 TRAP user account
msh> snmp v3trap {1-5} clear account
❖ Configuring an SNMP v3 encryption algorithm
msh> snmp v3auth {md5 | sha1}
❖ Configuring SNMP v3 encryption
msh> snmp v3priv {auto | on}
• If you select “auto”, the print job will be encrypted when encryption is pos-
sible.
• If you select “on”, Clear Text communication is not possible, and encryption
password must be set before encryption communication can be used.
❒ Encryption is possible when the security option is installed correctly and
the password is specified.
sntp
The printer clock can be synchronized with a NTP server clock using Simple Net-
work Time Protocol (SNTP). Use the “sntp” command to change SNTP settings.
work Time Protocol (SNTP). Use the “sntp” command to change SNTP settings.
❖ View settings
msh> sntp
❖ NTP server address configuration
You can specify the IP address of the NTP server.
msh> sntp server “IP_address”
❖ Interval configuration
msh> sntp interval “polling_time”