Gestetner c7528 Operating Guide
Monitoring and Configuring the Printer
263
Message List
This is a list of messages that appear in the printer's system log. The system log
can be viewed using the “syslog” command.
can be viewed using the “syslog” command.
System Log Information
Use the following command to display the system log information:
• UNIX: Use the “syslog” command and “rsh”, “rcp”, and “ftp” parameters.
• telnet : Use the “syslog” command.
Message
Problem and solutions
Access to NetWare server <file server name>
denied. Either there is no account for this print
server on the NetWare server or the password
was incorrect.
denied. Either there is no account for this print
server on the NetWare server or the password
was incorrect.
(In the print server mode) Login to the file serv-
er failed. Make sure that the print server is reg-
istered on the file server. If a password is
specified for the print server, delete it.
er failed. Make sure that the print server is reg-
istered on the file server. If a password is
specified for the print server, delete it.
add_sess: bad trap addr:<IpAddress>, com-
munity:<community name>
munity:<community name>
The IP address (0.0.0.0.) is unavailable when
the community access type is TRAP. Specify
the host IP address for the TRAP destination.
the community access type is TRAP. Specify
the host IP address for the TRAP destination.
add_sess: community<community name> al-
ready defined.
ready defined.
The same community name already exists.
Use another community name.
Use another community name.
add_sess_ipx: bad trap addr: <IPXaddress>,
community:<community name>
community:<community name>
The IPX address (00:00:00:00:00:00) is un-
available when the community access type is
TRAP. Specify the host IPX address for the
TRAP destination.
available when the community access type is
TRAP. Specify the host IPX address for the
TRAP destination.
add_sess_ipx: community <community name>
already defined.
already defined.
The same community name already exists.
Use another community name.
Use another community name.
Attach FileServer= <file server name>
Connection to the file server as the nearest
server has been established.
server has been established.
Attach to print queue <print queue name>
(In the print server mode) Attached to the print
queue.
queue.
Cannot create service connection
(In the remote printer mode) Connection to the
file server has not been established. The num-
ber of file server users may have exceeded the
maximum capacity of the file server.
file server has not been established. The num-
ber of file server users may have exceeded the
maximum capacity of the file server.
Cannot find rprinter (<print server
name>/<printer number>)
name>/<printer number>)
The printer with the number displayed on the
print server does not exist. Make sure that the
printer number is registered on the print server.
print server does not exist. Make sure that the
printer number is registered on the print server.
Change IP address from DHCP Server.
The IP address changes when DHCP lease is
renewed. To always assign the same IP ad-
dress, set a static IP address to the DHCP
server.
renewed. To always assign the same IP ad-
dress, set a static IP address to the DHCP
server.