Gestetner c7528 Operating Guide

Preparing for Printing

73

• Under Windows 2000, [Enable bidirectional support] must be selected, and

[Enable printer pooling] must not be selected on the [Port] tab with the RPCS
printer driver.

• In addition to the above, one of the following conditions must also be met:

• The SmartDeviceMonitor for Client port and the TCP/IP protocol must

be used.

• The standard TCP/IP port must be used without changing the default

port name (for Windows 2000/XP and Windows Server 2003).

• Microsoft TCP/IP print IP address must be specified for use (for Win-

dows NT 4.0).

• IPP port name must include the IP address when using the IPP protocol.

❖ When connected with IEEE 1394

• The computer must support bidirectional communication.

• The printer must be connected to the IEEE 1394 connector of a computer

using the IEEE 1394 interface cable.

• [Activate] must be selected in the SCSI print of IEEE 1394 and [Activate]

must be selected in the Bidi-SCSI print.

• Under Windows 2000/XP or Windows Server 2003, [Enable bidirectional sup-

port] must be selected, and [Enable printer pooling] must not be selected on
the [Port] tab with RPCS printer driver.

❖ When connected with USB

The printer must be connected to the computer's USB port using the USB in-
terface cable.
The computer must support bidirectional communication.

❒ Install SmartDeviceMonitor for Client from the CD-ROM provided.

Set up option settings when bidirectional communications are disabled.

❒ Under Windows 2000/XP and Windows Server 2003, Manage Printers per-

mission is required to change the printer properties in the [Printers] folder. Log
on as an Administrators or Power Users group member.

❒ Under Windows NT 4.0, Full Control permission is required to change the

printer properties in the [Printers] folder. Log on as an Administrators or Power
Users group member.

A

The [Printers] window appears.