Gestetner 3245e Operating Guide
If you cannot Make Clear Copies
111
3
If you cannot Make Clear Copies
Problem
Cause
Action
Copies appear dirty.
The image density is too
dark.
dark.
Adjust the image density.
.
Auto Image Density is not
selected.
selected.
Select Auto Image Density.
The reverse side of an orig-
inal image is copied.
inal image is copied.
The image density is too
dark.
dark.
Adjust the image density.
.
Auto Image Density is not
selected.
selected.
Select Auto Image Density.
A shadow appears on cop-
ies if you use the pasted
originals.
ies if you use the pasted
originals.
The image density is too
dark.
dark.
Adjust the image density.
.
Change the direction of the
original.
original.
Put mending tape on the
pasted part.
pasted part.
The same copy area is dirty
whenever making copies.
whenever making copies.
The exposure glass, platen
cover, or document feeder
belt is dirty.
cover, or document feeder
belt is dirty.
Clean them.
.
Copies are too light.
The image density is too
light.
light.
Adjust the image density.
.
Damp or rough grain pa-
per is used.
per is used.
Use dry paper without
rough grain.
rough grain.
Toner bottle is almost emp-
ty.
ty.
Add toner.
Parts of the image are not
copied.
copied.
The original is not set cor-
rectly.
rectly.
Set originals correctly.
An improper paper size is
selected.
selected.
Select the proper paper
size.
size.
Copies are blank.
The original is not set cor-
rectly.
rectly.
Set originals correctly.
A moire pattern is pro-
duced on copies.
duced on copies.
Your original has dot pat-
tern image or many lines.
tern image or many lines.
Place the original on the ex-
posure glass at a slight an-
gle.
posure glass at a slight an-
gle.
,,
,,,
,,,,
,,,,
yy
yyy
yyyy
yyyy
R