Gestetner 3245e Operating Guide

157

R

❒ If you want to unplug the power cord or turn off the main power switch,

make sure that the remaining memory space indicates 100% on the display for
facsimile mode.

❒ While the machine is unplugged, you can neither send nor receive a fax.

For details, see the Facsimile Reference.

• Do not touch areas on or around the fusing unit. These areas get hot.
• After making copies continuously, you may feel the exposure glass is heated.

But this is not a malfunction.

• You may feel warm around the ventilation hole. This is caused by exhaust air,

and not a malfunction.

• Do not turn off the operation switch while copying or printing. When turning

off the operation switch, make sure that copying or printing is completed.

• The machine might fail to produce good copy images if there should occur

condensation inside caused by temperature change.

• Do not open the covers of machine while copying or printing. If you do, mis-

feeds might occur.

• Do not move the machine while copying or printing.
• If you operate the machine improperly or a failure occurs on the machine,

your machine settings might be lost. Be sure to take a note of your machine
settings.

• Supplier shall not be liable for any loss or damages resulting from a failure on

the machine, loss of machine settings, and use of the machine.

•

Unplug the power cord from the wall outlet before you move the equipment. 
While moving the equipment, you should take care that the power cord will 
not be damaged under the equipment.