Gestetner 3245e Operating Guide
How to Set an Original
19
1
How to Set an Original
In this manual an original can mean a
single or multiple page document.
You can set your originals either in
the Document Feeder (ADF) or on the
exposure glass. Some types of origi-
nals are unsuitable for the Document
Feeder (ADF) so they must be set on
the exposure glass.
single or multiple page document.
You can set your originals either in
the Document Feeder (ADF) or on the
exposure glass. Some types of origi-
nals are unsuitable for the Document
Feeder (ADF) so they must be set on
the exposure glass.
⇒
P.15 “Acceptable
Types of Originals”
Which way you place your original
depends on its size and whether you
are using the Document Feeder
(ADF) or the exposure glass.
Which way you place your original
depends on its size and whether you
are using the Document Feeder
(ADF) or the exposure glass.
Limitation
❒ If you set 5
1
/
2
"
×
8
1
/
2
"/A5 size docu-
ments on the exposure glass, they
will not be detected. Set 5
will not be detected. Set 5
1
/
2
"
×
8
1
/
2
"/
A5 size documents in the ADF.
Note
❒ When sending a fax, the image
output at the other end depends on
the size and direction of paper
used in the receiver's terminal. If
the receiver does not use paper of
the same size and direction as that
of the original, the fax image may
be output reduced, trimmed at the
both edges, or divided into two or
more sheets. When sending an im-
portant original, we recommend
you to ask the receiver about the
size and direction of the paper
used in their terminal.
the size and direction of paper
used in the receiver's terminal. If
the receiver does not use paper of
the same size and direction as that
of the original, the fax image may
be output reduced, trimmed at the
both edges, or divided into two or
more sheets. When sending an im-
portant original, we recommend
you to ask the receiver about the
size and direction of the paper
used in their terminal.
❒ When sending an original of an ir-
regular (i.e. non-standard) size or
part of a large original, you can
specify the scan area precisely.
part of a large original, you can
specify the scan area precisely.
⇒
P.92 “Choosing the Area to be
Scanned Yourself (Irregular Scan Ar-
ea)”
Scanned Yourself (Irregular Scan Ar-
ea)”
❒ You can scan non-standard sized
documents as standard sized doc-
uments with the Irregular Scan
Area feature. When you turn on
this feature, the area scanned will
be in the specified range regardless
of the actual document size. A
blank margin will appear or the
image will be truncated at the re-
ceiving end.
Area feature. When you turn on
this feature, the area scanned will
be in the specified range regardless
of the actual document size. A
blank margin will appear or the
image will be truncated at the re-
ceiving end.
❒ Make sure that all ink, correcting
fluid etc. has completely dried be-
fore setting your original. If it is
still wet, the exposure glass will be
marked and those marks will ap-
pear on the received image.
fore setting your original. If it is
still wet, the exposure glass will be
marked and those marks will ap-
pear on the received image.
❒ If you set an 8
1
/
2
"
×
11"/A4 size
original in the sideways direction,
the machine rotates the image by
90 degrees before sending it.
the machine rotates the image by
90 degrees before sending it.
⇒
P.14 “Transmission with Image Rota-
tion”
tion”
Reference
For how to set 2-sided documents,
see P.90 “Book Fax”.
see P.90 “Book Fax”.
Chapter1 Page 19 Thursday, January 27, 2000 1:53 PM