Gestetner 3245e Operating Guide

Troubleshooting

128

If there is an error, one of the following messages may appear on the display. It
might just flash up briefly, so if you are watching for errors, stay by the machine
and check the display.

Clear Misfeed(s)

Remove originals from the Document 
Feeder.

Original misfeed

Remove originals from Document Feeder.

Set any pages of the original that were not 
scanned and send again.

Reset originals and press Start.

Original jammed during Memory Trans-
mission. Reset originals that have not 
been scanned.

Error. Transmission has been cancelled.

A document jam occurred during Imme-
diate Transmission. Press 

 and resend 

the page which has been not sent.

An error occurred during Immediate 
Transmission. Press 

 and re-send the 

original.

❒ There may be a problem with the ma-

chine or the telephone line (e.g. noise 
or cross talk). If the error re-occurs fre-
quently, contact your service represen-
tative.

Cannot detect original size. Reset origi-
nal(s) and press Start key. 

The machine failed to detect the size of the 
original. Press the 

< or > key to select 

the size and press the 

{

} key three 

times.

<FAX>

Personal Code Access. Please enter your 
Personal Code. 

Personal Codes Access is switched on. 
You need to enter a previously pro-
grammed 8 digit ID code. For more infor-
mation, see P.182 “Personal Codes”.

LService call
Functional problem with the fax. Please 
contact your service representative.

There is a problem with the fax function. 
Contact your service representative and 
tell the code number shown in the dis-
play. The copier function will still work 
normally.

Memory is full. Cannot store additional 
originals. (Stored original(s) will be trans-
mitted.)

If you press 

, the machine returns to 

the standby mode and start transmitting 
pages which has been scanned.

Chapter6  Page 128  Thursday, January 27, 2000  1:56 PM