Gestetner 3245e Operating Guide
Installing the Driver
22
3
Environments
To use Type 270 TWAIN Driver Ver.2, the following hardware and software en-
vironments are required.
vironments are required.
❖
Personal Computer
75 MHz or faster Intel Pentium CPU (200 MHz or faster recommended)
The computer must have a CD-ROM drive. (The driver is provided on a CD-
ROM.)
The computer must have a CD-ROM drive. (The driver is provided on a CD-
ROM.)
❖
OS
Windows 95/98 or Windows NT 4.0/3.51
Note
❒ Windows 3.1x is not supported.
❖
Memory
Windows 95/98: 16 MB or more (48 MB or more recommended)
Windows NT 4.0/3.51: 24 MB or more (64 MB or more recommended)
Windows NT 4.0/3.51: 24 MB or more (64 MB or more recommended)
❖
Display
Requires SVGA (800
×
600) supporting 256 colors or more.
❖
Hard Disk
100 MB of hard disk space (100 MB or more recommended) are required for
the installation, save and preview image files.
the installation, save and preview image files.
❖
Ethernet Board
It must be compatible with Windows 95/98 or Windows NT 4.0/3.51 envi-
ronments.
ronments.
Note
❒ The Ethernet board does not work if it is not recognized in the Windows
95/98 or Windows NT 4.0/3.51 environments.
❖
Ethernet Cable
Use category 5 STP cabling with an RJ-45 connector.
❖
Network Protocol
TCP/IP
❖
TWAIN Compliant Application
An application compliant to TWAIN 1.6 or later must be installed.
Note
❒ If you are not sure that the application you are using is compliant to
TWAIN 1.6 or later, contact the manufacturer of the application.