Gestetner 3532 Network Guide
Appendix
110
9
NetWare Printing
Form feed
You should not configure form feed
on NetWare. Form feed is controlled
by the printer driver on Windows. If
NetWare form feed is configured, the
printer might not work properly. If
you want to change form feed set-
tings, always configure using Win-
dows.
• With Windows 95/98/Me, clear
on NetWare. Form feed is controlled
by the printer driver on Windows. If
NetWare form feed is configured, the
printer might not work properly. If
you want to change form feed set-
tings, always configure using Win-
dows.
• With Windows 95/98/Me, clear
the [Form feed] check box on the
[Printer Settings]
[Printer Settings]
tab in the printer
properties dialog box.
• With Windows 2000/XP, clear the
[Form feed]
check box on the [Net-
Ware Settings]
tab in the printer
properties dialog box.
• With Windows NT 4.0, clear the
[Form feed]
check box on the [Net-
Ware Settings]
tab in the printer
properties dialog box.
Banner page
You should not configure a banner
page on NetWare. If you want to
change the banner page setting, al-
ways configure using Windows.
• With Windows 95/98/Me, clear
page on NetWare. If you want to
change the banner page setting, al-
ways configure using Windows.
• With Windows 95/98/Me, clear
the [Enable banner] check box on the
[Printer Settings]
[Printer Settings]
tab in the printer
properties dialog box.
• With Windows 2000/XP, clear the
[Enable banner]
check box on the
[NetWare Settings]
tab in the printer
properties dialog box.
• With Windows NT 4.0, clear the
[Enable banner]
check box on the
[NetWare Settings]
tab in the printer
properties dialog box.
Printing after resetting the machine
After resetting the remote printer, the
connection from the print server will
be cut off for about 30-40 seconds be-
fore re-connecting. Due to the Net-
Ware specification, print jobs may be
accepted, but they will not be printed
during this interval.
When using the machine as a remote
printer, wait about 2 minutes after re-
setting the printer before attempting
to print.
connection from the print server will
be cut off for about 30-40 seconds be-
fore re-connecting. Due to the Net-
Ware specification, print jobs may be
accepted, but they will not be printed
during this interval.
When using the machine as a remote
printer, wait about 2 minutes after re-
setting the printer before attempting
to print.
When Using IPP with
SmartNetMonitor for Client
SmartNetMonitor for Client
When using IPP with SmartNetMoni-
tor for Client, note the following:
• The network printer can only re-
tor for Client, note the following:
• The network printer can only re-
ceive one print job from SmartNet-
Monitor for Client at a time. While
the network printer is printing, an-
other user cannot access the net-
work printer until it completes the
job. In this case, SmartNetMonitor
for Client tries to access the net-
work printer until the retry inter-
val expires.
Monitor for Client at a time. While
the network printer is printing, an-
other user cannot access the net-
work printer until it completes the
job. In this case, SmartNetMonitor
for Client tries to access the net-
work printer until the retry inter-
val expires.
• If SmartNetMonitor for Client can-
not access the network printer and
times out, it will stop sending the
print job. In this case, you should
cancel the paused status from the
print queue window. SmartNet-
Monitor for Client will resume ac-
cess to the network printer. You
can delete the print job from the
print queue window, but canceling
a print job printed by the network
printer might cause the next print
job sent from another user to be in-
correctly printed.
times out, it will stop sending the
print job. In this case, you should
cancel the paused status from the
print queue window. SmartNet-
Monitor for Client will resume ac-
cess to the network printer. You
can delete the print job from the
print queue window, but canceling
a print job printed by the network
printer might cause the next print
job sent from another user to be in-
correctly printed.