Gestetner 3532 Network Guide
User Tools Menu (System Settings)
25
3
• Print at Delivery
Specifies whether or not re-
ceived fax documents that are
sent to ScanRouter V2 Profes-
sional should also be printed by
the machine at the same time.
ceived fax documents that are
sent to ScanRouter V2 Profes-
sional should also be printed by
the machine at the same time.
Note
❒ Default: No
• File to Deliver
Specifies whether all received
fax documents or only received
fax documents that include de-
livery codes (documents with
an ID and F code) should be
sent to ScanRouter V2 Profes-
sional.
fax documents or only received
fax documents that include de-
livery codes (documents with
an ID and F code) should be
sent to ScanRouter V2 Profes-
sional.
Note
❒ Default: File with Dlvry Code
• Delivery Failure File
If a received fax document can-
not be sent to ScanRouter V2
Professional, the document is
stored in the machine's memo-
ry. To print this stored data, se-
lect “Print File”; to delete the
data, select “Delete File”.
not be sent to ScanRouter V2
Professional, the document is
stored in the machine's memo-
ry. To print this stored data, se-
lect “Print File”; to delete the
data, select “Delete File”.
Note
❒ If the machine can send data
to ScanRouter V2 Profession-
al, data is sent automatically.
al, data is sent automatically.
❒ If you delete the data, you
will not be able to distribute
or print the data.
or print the data.
Setting the SMTP Port Number
The SMTP port number can be config-
ured from the computer using a Web
browser or telnet.
This section describes configuration
using a Web browser.
ured from the computer using a Web
browser or telnet.
This section describes configuration
using a Web browser.
AAAA
Start the Web browser.
BBBB
Point the browser to the URL or
IP address of the machine (e.g. ht-
tp://XXX.XXX.XXX.XXX/, where
the Xs represent the numeric IP
address).
IP address of the machine (e.g. ht-
tp://XXX.XXX.XXX.XXX/, where
the Xs represent the numeric IP
address).
CCCC
Click [Administrator Mode].
The dialog box for entering the
user name and password appears.
The dialog box for entering the
user name and password appears.
DDDD
Enter your user name and pass-
word, and then click [OK].
word, and then click [OK].
Note
❒ To use the factory default ac-
count, enter no user name and
enter "password" as the pass-
word.
enter "password" as the pass-
word.
EEEE
Click [Configuration]
→
→
→
→ [Network] →
→
→
→
[Protocol]
→
→
→
→ [SMTP] in the menu ar-
ea.
FFFF
Enter a number in [SMTP Port No.];
this appears in the work area.
this appears in the work area.
GGGG
Click [Apply].
The configuration is transmitted.
The configuration is transmitted.