Gestetner 5490 Operating Guide
x Clearing Misfeeds
173
5
D
Remove the misfed paper from
the inside as shown in the illus-
tration.
the inside as shown in the illus-
tration.
E
If you cannot remove the misfed
paper, remove paper from the
pressure cylinder.
paper, remove paper from the
pressure cylinder.
F
Set the drum unit and close the
front door.
front door.
Note
❒ For setting the drum unit, ⇒
-
-
-
-To prevent paper misfeeds:
If the paper is curled or the original's
leading edge margin is too narrow,
the following action is necessary.
• When you use curled paper, cor-
leading edge margin is too narrow,
the following action is necessary.
• When you use curled paper, cor-
rect the curl as shown.
• When the leading edge margin of
the original is less than 8mm, 0.32"
or there is a solid image on the
leading edge, insert the original
with the widest margin first or
make a leading edge margin by
making a copy.
or there is a solid image on the
leading edge, insert the original
with the widest margin first or
make a leading edge margin by
making a copy.
*: Less than 8mm, 0.32"
”
x
x
x
x + C” Paper Misfeeds in the
Paper Exit Section
A
Slowly, but firmly pull out the
misfed paper.
misfed paper.
-
-
-
-To prevent paper misfeeds:
When thin paper misfeeds in the pa-
per exit section, reduce the printing
speed with the
per exit section, reduce the printing
speed with the
{W
W
W
W}{V
V
V
V} {Speed} keys
(
Speed”). If you cannot reduce the
printing speed, close the trailing edge
guides or move the end plate toward
the paper delivery tray edge.
printing speed, close the trailing edge
guides or move the end plate toward
the paper delivery tray edge.
Z066