Gestetner 5490 Operating Guide
Auto Cycle
49
1
Auto Cycle
Use the
{Auto Cycle} key to process
masters and make prints in a single
operation.
operation.
Note
❒ When you use the optional docu-
ment feeder, it is not necessary to
place originals one by one. All
originals are fed and prints are
completed after you press the
place originals one by one. All
originals are fed and prints are
completed after you press the
{Start} key.
A
Place your original on the expo-
sure glass or in the optional docu-
ment feeder.
sure glass or in the optional docu-
ment feeder.
Note
❒ You can place up to 50 originals
into the optional document
feeder.
feeder.
B
Enter the number of prints re-
quired with the number keys.
quired with the number keys.
C
Press the
{{{{Start}}}} key.
D
Check the image position of the
trial or proof print.
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the [Image
=
=
=
E
Press the
{{{{Auto Cycle}}}} key.
F
Press the
{{{{Print}}}} key.
Note
❒ Repeat steps A through C until
all originals are printed when
you are placing originals on the
exposure glass.
you are placing originals on the
exposure glass.
❒ If you placing the original in the
optional document feeder, orig-
inals are fed and prints are com-
pleted automatically.
inals are fed and prints are com-
pleted automatically.