Gestetner 5455 User Manual

Operation

88

• There is no limit to the number of areas you can designate on a single com-

mand sheet.

• If designated areas on two or more command sheets overlap, the last com-

mand sheet will apply to the overlapping portion.

• If you use Outline mode for letter images with a thickness of less than 3mm,

0.12", the print image might come out as expected.

-

-

-

-Notes

The image might differ depending on how the designated area is drawn, so re-
member the following when making the command sheet.

Part of the designated area is 
surrounded by 3 sides of the en-
tire area.

Make a space of at least 2mm, 
0.08", in front of the area surround-
ed by 3 sides (relative to the feed 
direction).

1, 2 = 2mm, 0.08"

Double line pattern.

Only the outer line is 
recognized.

Make a gap of at least 2mm, 0.08" 
in width.

1

2