Gestetner 9870 Service Manual

Redialing

25

If a message was not transmitted suc-
cessfully, that does not mean that you
have to enter the telephone number
again. In many cases, the machine
will redial the destination automati-
cally. Or, with the AI Redial key, you
can redial with just a few keystrokes.

The machine will automatically redial
the other party if any of the following
conditions occurred.
• The other party was busy
• There was no reply from the other

party

• The message was rejected by the

machine at the other end because
of excessive errors (in this case, re-
dialing will only take place if
Memory Transmission was used)

❒ Redialing is done once at 5 minute

intervals.

❒ The number of redials and the re-

dial interval may be adjusted by a
service technician.

❒ During redialing, the number be-

ing dialed is displayed as shown
below.

2125551234

DIALING

The machine remembers the last 10
telephone numbers that you input. If
you have to redial one of these num-
bers, just press the {

} key, un-

til the required telephone number or
name is displayed, then press the

{

} key.

This feature has the following uses.
• If the machine is waiting to redial

the other party, you do not have to
wait for the redialing interval to
expire. Press the {

} key un-

til the required telephone number
or name is displayed, then press
the {

} key.

• If you wish to send another mes-

sage to the same address that you
sent one to recently, you don't
have to dial the full number again
if it is still in the Redial memory.
Place the message in the feeder,
then press the {

} key.

A

Press the {

} key un-

til the required number appears
in the display, then press the
{

} key twice.

REDIAL          Y/hi
a01 XYZ CO. NEW YORK

B

TRANSMIT  DIAL/START

DIAL NEXT FAX NUMBER