Gestetner cs210 User Manual
98
Image Creation
When using the [Size Input] key
1
Press the [Image Creation] key.
2
Press the [Repeat Image] key.
3
Press the [Size Input] key.
4
Enter the horizontal and vertical length with the
Number keys then press the [#] key.
Note
❐
The length that you can enter is 1 ~ 300mm, 0.1" ~
11.7". When you enter less than 5mm, 0.2", however,
the image might not be repeated well.
11.7". When you enter less than 5mm, 0.2", however,
the image might not be repeated well.
5
Press the [OK] key.
6
Set your originals, then press the Start key.