Gestetner ao70 Operating Guide

Copying

Basic Procedure

Preparation

You can specify whether the ma-
chine automatically starts to make
copies or if you need to press the

{Start} key before it starts copying.
See p.128 “Print Start Trigger”
The default setting is to start auto-
matically.

When the machine is set for a user
code, enter the user code with the
number keys, and then press the

{#} key.
The machine is ready to make cop-
ies.

Make sure the message "Ready" is
displayed on the screen.

Make sure that there are no previ-
ous settings remaining.

Note

❒ To clear settings, press the

{Clear Modes/Energy Saver} key.

Reference

For details about the settings for
the Initial Screen that appears
when you press the

{Clear

Modes/Energy Saver

} key, see

p.126 “General Features 1/2”.

When the message "To make an
additional copy, press Start
key." appears, the previous set-
tings and image of the scanned
original are saved in machine
memory. Press the

{Clear Modes/

Energy Saver

} key to clear the

settings. See p.36 “Additional
Copy”

Set your desired settings.

Note

❒ The settings are displayed on

the screen.

Reference

For details, see explanations of
each function.
If you use the

{Program} key to

access the program function,
you can store and easily call up
the settings. See p.53 “Program”

Select the paper.

Reference

p.42 “Selecting Copy Paper”

Place your originals.
The originals are fed into the ma-
chine.

Important

❒ Once the originals start to feed

into the machine, do not push or
pull them. This may damage
your originals.

DolphinGB-Copy-F_V4_FM.book Page 28 Monday, June 11, 2001 5:02 PM