Gestetner ao70 Operating Guide
Directional Size Magnification (mm)
67
2
Directional Size Magnification (mm)
You can specify the length for the hor-
izontal and vertical size separately.
You can use this function to distort
the image.
izontal and vertical size separately.
You can use this function to distort
the image.
Preparation
Measure and specify the lengths of
the original and copy by compar-
ing "A" with "a".
You can set the ratio from 25.0 to
400.0%.
the original and copy by compar-
ing "A" with "a".
You can set the ratio from 25.0 to
400.0%.
Limitation
❒ You cannot use Directional Size
Magnification (mm) if Auto Paper
Select is selected.
Select is selected.
Note
❒ If the calculated ratio is less than
25%, the ratio is set to 25.0%, if it is
more than 400%, it is set to 400.0%.
more than 400%, it is set to 400.0%.
A
Press the [Reduce/Enlarge] key.
B
Press the [Size Magnification] key.
C
Press the [D. Size Mag.(mm)] key.
D
Enter the length for [Orig. Horiz.]
with the number keys, and then
press the [#] key.
with the number keys, and then
press the [#] key.
Note
❒ To change the value, press the
[Clear]
key, and then enter the
new value.
E
Enter the length for [Copy Horiz.]
with the number keys, and then
press the [#] key.
with the number keys, and then
press the [#] key.
ZEDG100E
DolphinGB-Copy-F_V4_FM.book Page 67 Monday, June 11, 2001 5:02 PM