Gestetner cs331 Service Manual
1
2
3
4
5
6
7
8
9
10
11
12
9
1
Handle and use the copier gently and carefully.
• Do not place anything on the paper drawers or the original feeding tray.
• Never allow the power cable to be trampled on or pinched between hard objects, otherwise an
• Never allow the power cable to be trampled on or pinched between hard objects, otherwise an
accident or electrical trouble might occur.
• Do not allow any metal items such as paper clips to fall into the copier.
2
Be sure to turn OFF the power switch (unless using the weekly timer mode):
• When you leave your office at night.
• If a power failure occurs.
• If a power failure occurs.
Caution: When turning OFF the power switch, be sure to do so only after the machine cycling
has come to a complete stop.
Be sure to disconnect the power-cord plug:
• When you do not intend to use the copier for an extended period of time.
Be sure to turn OFF the power switch immediately and call for service:
• If an unusual noise is heard from the copier.
• If the outside of the copier becomes unusually hot.
• If any part of this copier is damaged, or if it has been dropped.
• If the copier has been exposed to rain or liquid.
• If the outside of the copier becomes unusually hot.
• If any part of this copier is damaged, or if it has been dropped.
• If the copier has been exposed to rain or liquid.
3
It is recommended that only supplies made or designated by the supplier be used for
this machine in order to optimize copy quality. All supplies should be stored in a cool,
dry area.
For optimum performance, it is recommended that 21lb. xerographic bond paper of high quality be
used.
Paper of lower quality may contain inherent properties such as excess paper dust and may lead to
premature servicing.
used.
Paper of lower quality may contain inherent properties such as excess paper dust and may lead to
premature servicing.
4
Do not apply force or place heavy objects (8.83lb. or more) on the original glass. Breaking
the glass may cause personal injury.
5
Do not place heavy objects on the copier. They may fall and injure you.
6
ALWAYS keep the plug and outlet clean. Prevent them from accumulating dust and dirt.
This could cause a fire and give you an electric shock due to the heat released by
electric leakage.
7
Be very careful to treat the touch panel gently and never hit it. Breaking the surface
could cause malfunctions.
8
NEVER attempt to repair, disassemble or modify the equipment by yourself. You could
cause a fire or get an electric shock.
ALWAYS contact your Service representative for maintenance or repair of the internal
parts of the equipment.
2. General Precautions
WARNING: DO NOT LEAN ON, APPLY FORCE OR PLACE HEAVY OBJECTS ON THE
FINISHER. PERSONAL INJURY OR PROPERTY DAMAGE MAY RESULT.
Keep the machine away from flammable liquids, gases, and aerosols. A fire or an
electric shock might occur.
electric shock might occur.