Gestetner cs331 Service Manual
1
2
3
4
5
6
7
8
9
10
11
12
9-2
WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
1. DESCRIPTION OF THE FLASHING GRAPHIC SYMBOLS
The graphic display on the touch panel shows the
status of the copier. When one of the graphic symbols
flashes, take the appropriate action referring to the
page shown.
status of the copier. When one of the graphic symbols
flashes, take the appropriate action referring to the
page shown.
CHECK ORIGINALS
symbol
Flashes when an original misfeed occurs inside
the reversing automatic document feeder
(optional).
the reversing automatic document feeder
(optional).
Page 9-9
BYPASS MISFEED
symbol
Flashes when a sheet of paper fails to be fed into
the copier during bypass copying.
the copier during bypass copying.
Page 9-12
REPLACE TONER CARTRIDGE
symbol
Flashes when the toner cartridge runs out of toner.
Page 9-5
PAPER PATH MISFEED
symbol
Flashes when a paper misfeed occurs on the
paper path inside the copier.
paper path inside the copier.
Page 9-12
LARGE-CAPACITY FEEDER MISFEED
symbol
Flashes when paper fed from the large-capacity
feeder (optional) is misfed.
feeder (optional) is misfed.
Page 9-11
DRAWER MISFEED
symbol
Flashes when paper fed from one of the drawers
is misfed.
is misfed.
Page 9-10
STACK
symbol
Flashes when sheets of paper copied on one
side are stacked in the automatic duplexer
(optional) during duplex copying (this flashing
does not indicate a paper jam). This symbol also
flashes when sheets of paper are left in the
duplexer. In this case, remove the paper from
side are stacked in the automatic duplexer
(optional) during duplex copying (this flashing
does not indicate a paper jam). This symbol also
flashes when sheets of paper are left in the
duplexer. In this case, remove the paper from
the duplexer.
Page 9-16
DUPLEXER MISFEED
symbol
Flashes when a paper misfeed occurs inside the
automatic duplexer (optional).
automatic duplexer (optional).
Page 9-15
TRANSFER BELT MISFEED
symbol
Flashes when a misfeed occurs on the transfer
belt.
belt.
Page 9-13
SADDLE STITCH UNIT MISFEED
symbol
Flashes when a paper misfeed occurs inside the
saddle stitching unit.
saddle stitching unit.
Page 9-19
FUSER MISFEED
symbol
Flashes when a paper misfeed occurs in the fuser
unit.
unit.
Page 9-14
FINISHER/PUNCH UNIT MISFEED
symbol
Flashes when a paper misfeed occurs inside the
finisher (optional) or the hole punch unit (optional).
finisher (optional) or the hole punch unit (optional).
Page 9-17, 9-18
CALL SERVICE symbol
Flashes when inspection and maintenance by a
service technician become necessary.
Flashes when inspection and maintenance by a
service technician become necessary.
Page 9-28