Gestetner cs331 Service Manual
1
2
3
4
5
6
7
9
10
11
12
8
5-20
USING THE EDITING FUNCTIONS
2
Press the EDIT key to enter the editing menu, and
press the IMAGE REPEAT key.
- If the key for the desired function is not shown, press the
Next key to switch the screen.
11. IMAGE REPEAT
You can repeat the entire original or a part of the area of the original on the copy.
* Image repeat is only possible with standard sized originals. However, a non-standard sized original
* Image repeat is only possible with standard sized originals. However, a non-standard sized original
can be copied if it is placed on a standard sized original and its area is specified.
3
Place an original on the glass to specify the area.
- Set the original face up with the bottom toward you, fit its
top left corner against the top left corner of the glass, and
align it with the original scale.
align it with the original scale.
Non-standard size
Standard size
1
Place paper in the drawer(s).
Page 2-4
- When using this mode in bypass copying (
Page 6-5), be
sure to specify the paper size.
4
Using the original scale on the left and the inner
(top) scale, read the position of the desired area, as
follows:
- X1 Distance from the top left to the left edge of the specified
area.
- X2 Distance from the top left to the right edge of the
specified area.
- Y1 Distance from the top left to the upper edge of the
specified area.
- Y2 Distance from the top left to the lower edge of the
specified area.