Gestetner cp6143l Operating Guide
Basics
28
2
Placing Originals
When using the exposure glass, place
the originals face down.
When using the ADF, place the origi-
nals face up.
the originals face down.
When using the ADF, place the origi-
nals face up.
Placing Originals on the
Exposure Glass
Exposure Glass
A
Lift the exposure glass cover.
Note
❒ Be sure to lift the exposure glass
cover more than 30°.
B
Place the original face down on
the exposure glass. The original
should be aligned with the left
scale.
the exposure glass. The original
should be aligned with the left
scale.
1.
Left scale
C
Lower the exposure glass cover.
D
Adjust print settings as necessary,
and then press the {Start} key.
and then press the {Start} key.
Placing Originals in the Auto
Document Feeder
Document Feeder
A
Adjust the guide to the original
size.
size.
B
Insert the aligned originals face up
into the ADF.
into the ADF.
Note
❒ To avoid originals misfeeding,
fan the originals before placing
them in the ADF.
them in the ADF.
Limitation
❒ Approximately 30 originals (80
g/m
2
, 20 lb) can be inserted at a
time in the ADF. The first (top)
original will be fed first.
original will be fed first.
Note
❒ To avoid jamming, fan the orig-
inals before placing them in the
ADF.
ADF.
❒ The guides must fit snugly against
both sides of the stack.
ANT064S
ACY070S
AJK153S
C2678608_Platinum-EN.book Page 28 Sunday, February 12, 2006 10:53 PM