Gestetner cp6143l Operating Guide

Sample Print and Adjustment

37

Once the master making has been
completed, it is possible to confirm
the print finish before pressing the

{Print} mode select key to start the
printing process.

A

Press the {Proof} key.

A single printed page is ejected.

❒ Press the key continuously to

eject printed pages in succes-
sion.

After master making, you can adjust
the print image position to suit your
needs. There are two ways:

❖ Shifting the Image Position Forward

Shift the image position using the

{Image Position} keys.

❖ Shifting the Image Position to the

Shift the image position using the
side tray fine adjusting dial.

* Paper feed direction

A

Press the left {Image Position} key
to move the image forwards, the
right key to move it backwards.

❒ When you shift the image for-

wards, leave a margin (more
than 5 mm, 0.2") at the leading
edge. If there is no margin, pa-
per might wrap around the
drum and cause a misfeed.

❒ The right or left {Image Position}

keys shift the image about 0.5
mm, 0.02" each time they are
pressed. 

❒ The value of the image position

that shifted is displayed on the
panel display.

ANT123S

GRFORW0E

ANT137S

C2678608_Platinum-EN.book  Page 37  Sunday, February 12, 2006  10:53 PM