Gestetner cp6143l Operating Guide
Printing Functions
58
3
C
Use the {U}{T}keys to select Re-
peat 2, and then press the {OK}
key.
peat 2, and then press the {OK}
key.
D
Use the {U}{T} keys to select
original and paper size, and then
press the {OK} key.
original and paper size, and then
press the {OK} key.
E
Press the {Start} key.
Skip Feed Printing
If the backs of prints are dirty, you
can use the {Skip Feed} key to make
the drum rotate twice instead of once
with every sheet of paper fed. This
gives you time to remove prints one
by one from the paper delivery tray,
or to insert a sheet of paper between
two prints.
can use the {Skip Feed} key to make
the drum rotate twice instead of once
with every sheet of paper fed. This
gives you time to remove prints one
by one from the paper delivery tray,
or to insert a sheet of paper between
two prints.
Note
❒ You can specify how many times
that the drum rotates when the
power is turned on. Alternatively,
you can also choose whether or not
to change the number of rotations
temporarily when the {Skip Feed}
key is pressed. See “Skip Feed” on
p.107 “5 Mode Settings”.
power is turned on. Alternatively,
you can also choose whether or not
to change the number of rotations
temporarily when the {Skip Feed}
key is pressed. See “Skip Feed” on
p.107 “5 Mode Settings”.
❒ The number of rotations can be set
from 2 to 9.
❒ The default is 2.
A
Press the {Skip Feed} key.
B
Press the {Start} key.
ANT128S
ANT144S
ANT128S
C2678608_Platinum-EN.book Page 58 Sunday, February 12, 2006 10:53 PM