Gestetner ao80 Operating Guide
7
1. Basics
Before Copying
Before you start copying, specify the original and copy paper locations.
❖
❖
❖
❖ Paper Capacities For Each Original/Paper Output
Original output
Capacities
Original Exit : Top
A1 (D)
L or smaller:
50 sheets (plain paper)
20 sheets (translucent paper)
• Use originals that are the same size, and of medium or high qual-
ity paper.
• Do not use paper that is long length paper, thick, curled, film,
folded, or translucent paper that is less than 80 g/m
2
(21.3 lb) in
weight.
• Do not load more than 10 sheets during very hot or humid con-
ditions.
• Output thick paper (104.7 g/m
2
(27.9 lb) or more) to Rear (Straight).
• Translucent paper: 80 g/m
2
(21.3 lb) or less, plain paper: 52.3
g/m
2
(13.9 lb) or less, and originals that are not stiff should be
output to Rear (Straight).
Original Exit : Rear
(Straight)
(Straight)
A0 (E)
K or smaller:
1 sheet (plain paper)
1 sheet (translucent paper)
1 sheet (film)
• When output originals of A1 (E)
K or larger, the ejected originals
may interfere with the copy paper and impede its progress. If this
happens, use the copy output (rear) auxiliary guide.
happens, use the copy output (rear) auxiliary guide.
• When copying A0 (E)
Ksize originals, remove them one by one.
Original Exit : Rear
(document roller)
(document roller)
A1 (D)
Lor larger:
1 sheet (up to 6 m (236")) (plain
paper)
paper)
1 sheet (up to 3.6 m (141")) (trans-
lucent paper)
lucent paper)
1 sheet (up to 3.6 m (141")) (film)
• Use face-curl originals.
• For roll originals, use originals with a diameter of roll
Φ40 mm –
Φ110 mm (Φ1.6" – Φ4.3").
• Do not use the document roller when copying on originals of size
longer than the maximum length for each paper type. Use both
hands to roll the original.
hands to roll the original.
DolphinC2_ENcopy_F_FM.book Page 7 Friday, February 25, 2005 10:46 AM