Gestetner ao80 Operating Guide
Copying
50
2
Erase Outside
Use this function to copy the original
while erasing outside a specified area.
while erasing outside a specified area.
Note
❒ To specify the area you want to
erase, you have to define the value
of X1, Y1, X2, and Y2. Measure the
area you want to specify before en-
tering the area settings.
of X1, Y1, X2, and Y2. Measure the
area you want to specify before en-
tering the area settings.
❒ When using this function with
magnification, the actual setting
will be the specified setting multi-
plied by the reproduction ratio.
will be the specified setting multi-
plied by the reproduction ratio.
AAAA
Press [Edit / Stamp].
BBBB
Press [Erase].
CCCC
Press [Erase Outside].
DDDD
Enter the length of “X1” using the
number keys, and then press [#].
number keys, and then press [#].
Note
❒ To change the value, press [Clear],
and then enter the new one.
EEEE
Enter the length of “X2”, “Y1”,
and “Y2” in the same way.
and “Y2” in the same way.
FFFF
Press [OK] three times.
Margin Adjustment
When Synchro Cut is selected, you
can create a margin on the copy's
leading and trailing edge.
can create a margin on the copy's
leading and trailing edge.
Erase Outside
ABB526S
Area
AHD047S
AHD007S
DolphinC2_ENcopy_F_FM.book Page 50 Friday, February 25, 2005 10:46 AM