Gestetner dsc535 Operating Guide
Copier / Document Server Features
98
3
Edit
This section describes the user tools in the Edit menu under Copier / Document
Server Features.
Enter the width of the binding margin with the number keys as follows:
• Metric version: 0–30 mm (in increments of 1 mm)
• Inch version: 0”-1.2” (in increments of 0.1 inch)
Enter the width of the erased margin with the number keys as follows:
• Metric version: 2–99 mm (in increments of 1 mm)
• Inch version: 0.1”-3.9” (in increments of 0.1 inch)
An image of approximately 1.5 mm (0.06”) will not be displayed as the width of
the separation line, when specifying solid or broken lines.
Server Features.
Enter the width of the binding margin with the number keys as follows:
• Metric version: 0–30 mm (in increments of 1 mm)
• Inch version: 0”-1.2” (in increments of 0.1 inch)
Enter the width of the erased margin with the number keys as follows:
• Metric version: 2–99 mm (in increments of 1 mm)
• Inch version: 0.1”-3.9” (in increments of 0.1 inch)
An image of approximately 1.5 mm (0.06”) will not be displayed as the width of
the separation line, when specifying solid or broken lines.
❖ Front Margin: Left/Right
Specify left and right margins on the front side of copies in Margin Adjust-
ment mode.
• Left
• Right
Default:
• Metric version: Left 5 mm
• Inch version: Left 0.2”
ment mode.
• Left
• Right
Default:
• Metric version: Left 5 mm
• Inch version: Left 0.2”
❖ Back Margin: Left/Right
Specify left and right margins on the back side of copies in Margin Adjust-
ment mode.
• Left
• Right
Default:
• Metric version: Left 5 mm
• Inch version: Left 0.2”
ment mode.
• Left
• Right
Default:
• Metric version: Left 5 mm
• Inch version: Left 0.2”
❖ Front Margin: Top/Bottom
Specify top and bottom margins on the front side of copies in Margin Adjust-
ment mode.
• Top
• Bottom
Default:
• Metric version: Top/Bottom 0mm
• Inch version: Top/Bottom 0.0”
ment mode.
• Top
• Bottom
Default:
• Metric version: Top/Bottom 0mm
• Inch version: Top/Bottom 0.0”