Gestetner dsm651 Operating Guide
Copier Functions
29
2
-
-
-
-Rotated copy
If the orientation of the original (
L or K) is different to that of the paper you are
copying onto, this function rotates the original image by 90
°, fitting it onto the
copy paper. This function works when [Auto Paper Select] or [Auto Reduce/En-
large] is selected. See p.27 “Auto Paper Select”, p.31 “Auto Reduce/Enlarge”.
large] is selected. See p.27 “Auto Paper Select”, p.31 “Auto Reduce/Enlarge”.
Note
❒ The default setting for Auto Tray Switching is [With Image Rotation]. You
cannot use the Rotated Copy function if this setting is changed to [Without
Image Rotation] or [Off]. See p.123 “Auto Tray Switching”.
Image Rotation] or [Off]. See p.123 “Auto Tray Switching”.
❒ Depending on the settings for the Punch, Staple or Z-fold functions, you may
not be able to use the Rotated Copy function.See p.37 “Staple”, p.39 “Punch”,
p.43 “Z-fold”.
p.43 “Z-fold”.
Preset Reduce/Enlarge
You can select a preset ratio for copy-
ing.
ing.
❖
❖
❖
❖ Base Point
The base point of Reduce/Enlarge
differs depending on how the orig-
inal was scanned. When the origi-
nal is placed on the exposure glass,
the upper left corner is the base
point. When placed in the ADF, the
bottom left corner is the base point.
differs depending on how the orig-
inal was scanned. When the origi-
nal is placed on the exposure glass,
the upper left corner is the base
point. When placed in the ADF, the
bottom left corner is the base point.
1.
Base point when placed on the ex-
posure glass.
2.
Base point when placed in the
ADF.
Reference
Related default settings:
p.126 “Shortcut R/E”
p.128 “R/E Priority”
p.126 “Shortcut R/E”
p.128 “R/E Priority”
R
R
MartiniC2_EN_Copy-F1_FM.book Page 29 Tuesday, July 27, 2004 1:43 PM