Gestetner dsm651 Operating Guide

Copying

Important

❒ When Basic Authentication, Win-

dows Authentication, or LDAP
Authentication is set, always log
off when you have finished using
the machine to prevent unautho-
rized users from using the ma-
chine.

Interrupt Copy

Use this function to interrupt a long
copy job to make urgently needed
copies.

AAAA

Press the

{{{{Interrupt}}}} key.

The Interrupt indicator lights.

When scanning is interrupted

A Remove the originals that were

being copied, and then place
the originals you want to copy.

B Press the {{{{Start}}}} key.

Copying starts.

C When copying is complete, re-

move the originals and copies.

D Press the {{{{Interrupt}}}} key again.

The Interrupt indicator turns
off.

E When the display prompts you

to do so, place the former set of
originals again.

F Press the {{{{Start}}}} key.

Note

❒ The previous copy job's set-

tings are restored and the
machine continues copying
from where it left off.

When the machine continues
copying

A Place the originals you want to

copy.

B Press the {{{{Start}}}} key.

The machine stops the previous
job and starts copying the new
originals.

C When copying is complete, re-

move originals and copies.

D Press the {{{{Interrupt}}}} key again.

The Interrupt indicator goes
out.
The previous copy job's settings
are restored and the machine
continues copying from where
it left off.

Left Original Beeper

The beeper sounds and an error mes-
sage is displayed if you leave origi-
nals on the exposure glass after
copying.

Note

❒ See p.125 “Tone: Original re-

mains”.

Copy Face Up

Use this function to reverse the order
of copies.

Preparation

Before using this function, register
"Face up" as a copy function key.
See p.125 “Copy Function Key: F1-
F5”.

ZGVS030E

MartiniC2_EN_Copy-F1_FM.book Page 20 Tuesday, July 27, 2004 1:43 PM