Gestetner dsm651 Operating Guide

Placing Originals

Placing Originals on the
Exposure Glass

Reference

For related default settings, see
p.135 “Eject Copy Face Up/Down
in Glass Mode”.

AAAA

Lift the exposure glass cover or
the ADF.

Important

❒ Do not lift the exposure glass

cover or the ADF forcefully.
O t h e r wi s e , t h e A D F c o v e r
might open or be damaged.

Note

❒ Be sure to lift the exposure glass

cover or ADF more than 30

°.

Otherwise, the size of the origi-
nal might not be detected cor-
rectly.

BBBB

Place the original face down on
the exposure glass. It should be
aligned with the rear left corner.

Positioning mark

Scale

Note

❒ Start with the first page to be

copied.

CCCC

Lower the exposure glass cover or
ADF.

Placing Originals in the Auto
Document Feeder

Settings should be made accordingly
in the following situations:

❖

❖ When placing originals consisting of

more than 100 pages:

p.16 “Batch”

❖

❖ When placing originals one by one:

p.17 “SADF”

❖

❖ When placing originals of the same

width but different sizes:

p.17 “Placing originals of mixed
sizes”

❖

❖ When placing custom size originals:

p.18 “Placing custom size origi-
nals”

Note

❒ Do not stack originals above the

limit mark on the side guide of the
ADF.

❒ The last page should be on the bot-

tom.

❒ When you copy 2-sided originals,

both front and back sides of each
original are scanned at once.

❒ Do not place objects on the sensors

or cover them with your hands, or
the original size may not be detect-
ed properly. Also, do not place
anything on the exposure glass
cover as this could cause a mal-
function.

MartiniC2_EN_Copy-F1_FM.book Page 15 Tuesday, July 27, 2004 1:43 PM