Gestetner dsm725e Reference Manual
Enhanced Network Security
108
5
Enabling SSL
After installing the server certificate in the machine, enable the SSL setting.
This procedure is used for a self-signed certificate or a certificate issued by a cer-
tificate authority.
This procedure is used for a self-signed certificate or a certificate issued by a cer-
tificate authority.
A
Open a Web browser.
B
Enter “http://(machine's-address)/” in the address bar to access the printer.
C
Log onto the machine.
The network administrator can log on.
Enter the login user name and login password.
The network administrator can log on.
Enter the login user name and login password.
D
Click [Configuration], click [Security], and then click [SSL/TLS].
The [SSL/TLS] page appears.
The [SSL/TLS] page appears.
E
Click [Enable] for [SSL/TLS].
F
Click [Apply].
The SSL setting is enabled.
The SSL setting is enabled.
G
Log off from the machine.
Note
❒ If you set [Permit SSL / TLS Communication] to [Ciphertext Only], enter “ht-
tps://(machine's address)/” to access the machine.
D0086951_RussianC45-EN.book Page 108 Wednesday, May 31, 2006 11:45 AM