Gestetner dsm725e Network Guide

Monitoring and Configuring the Printer

56

To use on-demand e-mail notification, perform the following configuration
tasks in Web Image Monitor.

A

In the menu area, click [E-mail].

B

Make the following settings:
• E-mail Notification E-mail Address: Enter the address using alphanumeric

characters.

• Receive E-mail Notification: Specify whether to use on-demand e-mail no-

tification.

• E-mail Notification User Name: Enter the administrator's user name as the

mail originator name.

• E-mail Notification Password: Enter the password of the mail notification

user.

C

Click [OK].

D

Click [Logout].

E

Quit Web Image Monitor.

❖ Format of on-demand e-mail messages

To use mail notification, you need to send an on-demand e-mail message to
this machine.
Using your mail software, enter the following:

❒ A mail message must be within 1 MB in size.
❒ E-mail may be incomplete if sent immediately after power on.

❖ Subject field

Format: devicestatus?parameter-name=parameter[&=parameter][&=param-
eter]...

❒ The Subject field is case-insensitive.
❒ Parameter names can be written in any order.

Subject (Referred to as Subject)

Enter a request regarding the device. For de-
tails, see the table below.

From (Referred to as From)

Specify a valid mail address. The device in-
formation will be sent to the address speci-
fied here.