Gestetner dsm725e Operating Guide

Turning On the Power

27

❒ In the following cases, the indicator will not go off but will instead blink

when you press the operation switch:
• When the exposure glass cover or ADF is open.
• During communication with external equipment.
• When the hard disk is active.
• If a file is waiting to be transmitted within the next minute using the

“Send Later” facsimile function.

Turn off the main power as follows:

❒ Do not turn off the main power switch when the On indicator is lit or blink-

ing. Failure to observe this may result in damage to the hard disk or memory,
leading to malfunction.

❒ Be sure to pull out the power cord only after you have turned off the main

power switch. Not doing this may result in damage to the hard disk or memory.

A

B

Open the switch cover, and then turn off the main power switch.
The main power indicator goes off.

❒ When the main power switch is turned off while using the fax function,

waiting fax and print jobs may be canceled, and incoming fax documents
not received. If you have to turn off this switch for some reason, make sure
100% is shown as available memory on the screen before turning off the
main power switch or unplugging the power cord. Fax files in memory are
deleted an hour after you turn off the main power switch or unplug the
power cord.

Reference
“Turning Off the Main Power / In the Event of Power Failure”, Troubleshooting