Gestetner 27ao User Guide

COLLATE JOBS

64    RW-470 CLIENTS

If the new entry is to be inserted in front of the marked entry,
select:

Edit – insert entry...

The program opens a file selection window.

3.  Select the required file, which has one of the above file for-

mats and confirm with “OK“. You can now mark several files
to insert lots of drawings in one go, as in the File Manager.

To add an entry using Drag & Drop, proceed as follows:
1.  Open Windows NT Explorer or File Manager and arrange the

two windows of RW-470 PLOTCLIENT WIN and Explorer or
File Manager so that they are positioned next to each other or
on top of each other.

2.  Mark an entry in the entry list of RW-470 PLOTCLIENT WIN,

after which the new entry is to be inserted.
If you want to insert a new entry in front of an existing entry,
mark the entry in the entry list before the existing entry!
If you do not mark any entry, new entries will always be in-
serted at the end of the list.

3.  Change to the folder in Explorer or File Manager from which

you want to fetch the new entry.

4.  Click on the required file with the left-hand mouse button and

holding the mouse button pressed down, drag the file to the
file list of RW-470 PLOTCLIENT WIN. You can also add sev-
eral drawings in one go as in Explorer or File Manager by
marking several files.

Sometimes, a customer job order is such that an entry has to be
printed several times with different settings: e.g. if an entry is to
be plotted once with A0 format on paper and the second time
with A1 format on a transparency. To do this, you can also add
an entry several times.