AirLink awmb100 User Manual

Page of 46
27
System 
Uptime 
The duration of time the AirLink101 Music 
Bridge has been servicing the network. 
Firmware Version  The version of the firmware installed on your 
AirLink101 Music Bridge device.  
Wireless Configuration 
Mode 
There are two modes supported: Access Point 
and Client 
Band 
Shows the wireless band that is being used. 
SSID The 
SSID 
differentiates wireless networks from 
each other. Therefore, all access points and 
devices attempting to connect to a network 
must use the same SSID. It is case-sensitive 
and must not exceed 32 characters. A device 
will not be permitted to join the network unless 
it can provide the unique SSID. The SSID is 
also referred to as a “network name”. 
Channel Number 
The number of channels supported depends on 
the where in the world you are using the 
AirLink101 Music Bridge. All stations 
communicating with the Access Point must use 
the same channel.  
Encryption 
Encryption (Wired Equivalent Privacy) is set to 
Disabled by default. When WPA, WPA2, or 
WEP are enabled, data is encrypted before 
being transmitted onto the network. This 
prevents data packets from being 
eavesdropped by attackers and snoopers. By 
using  encryption, there may be a reduction of 
data throughput on the wireless link. 
BSSID 
BSSID displays the ID of the current Basic 
Service Set (BSS), which uniquely identifies 
each network. If AirLink101 Music Bridge is in 
AP mode, this value is its MAC address. 
Associated Clients  Displays the total number of clients associated 
to this device. You can have up to 64 clients 
associating to a device at once.  
TCP/IP Configuration 
Attain IP Protocol   Displays how the AirLink101 Music Bridge 
obtained its IP address, either through a Fixed-
IP or as a DHCP-client.  
IP Address   
Current IP address for this device 
Subnet Mask   
Current Subnet mask for this device 
Default Gateway    Default Gateway for this device 
MAC Address  
The MAC Address for this device