AirLink aic250w User Manual

Step 2

Rename the SSID of the Camera or keep it as default.

Step 3

Set the desired Wireless Channel.

Step 4

If you have enabled encryption on your wireless computer, you will need to set

the identical encryption settings on the Camera. Enter the appropriate encryption
settings. For more information regarding how to set the encryption settings, please refer
to Section 8.2.3 Configuration – Wireless.

Step 5

Click Save.

Step 6

Click on Management and go to Wireless. Verify that the Connection Mode is

Ad-Hoc and the Link is Yes. Also verify that the SSID matches the SSID you have set.

Note:

If the Link does not say Yes, click on the Refresh button until it displays Yes.

Step 7

Manually change the TCP/IP setting of your wireless computer to use a static IP

address and assign the appropriate IP Address, Subnet Mask, and Default Gateway
according to your network. If you do not know how to do this, it is recommended that
you do not connect directly to the Camera, but connect through the wireless router
instead.

Step 8

Configure your computer’s wireless adapter to Ad-Hoc mode, using the same

SSID and Channel number as the Camera.