ONKYO BD-SP308 User Guide

En

You can change the settings of the player in the “Setup” 
menu.

Select a TV aspect ratio option according to your TV type.

`

4:3 Letter Box:

Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars above 
and below the picture.

`

4:3 Pan Scan:

Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen. 
Both sides of the picture are cut off.

`

16:9 Original:

Select when a 16:9 wide TV is connected.
The 4:3 picture is displayed with an original 4:3 
aspect ratio, with black bars appearing at the left and 
right sides.

`

16:9 Full:

Select when a 16:9 wide TV is connected.
The 4:3 picture is adjusted horizontally (in a linear 
proportion) to fill the entire screen.

• You cannot select “4:3 Letter Box” and “4:3 Pan Scan” option 

when the resolution is set to higher than 720p.

Sets the output resolution of the Component and HDMI 
video signal. Refer to page 13 and 40 for details about the 
resolution setting.

`

Auto:

If the HDMI OUT jack is connected to TVs provid-
ing display information (EDID), automatically 
selects the resolution best suited to the connected 
TV. If the VIDEO OUTPUT (COMPONENT) is 
only connected, this changes the resolution to 1080i 
as default resolution.

`

1080p:

Outputs 1080 lines of progressive video.

`

1080i:

Outputs 1080 lines of interlaced video.

`

720p:

Outputs 720 lines of progressive video.

`

576p:

Outputs 480/576 lines of progressive video.

`

576i:

Outputs 480/576 lines of interlaced video.

k).

e/r to select the “Setup” and press 

j).

The “Setup” menu appears.

q/w to select the first setup option, and press 

r to move to the second level.

q/w to select a second setup option, and press 

j) to move to the third level.

q/w to select a desired setting, and press 

j) to confirm your selection.