ONKYO BD-SP809 User Guide

] Ȼ “Settings” Ȼ “HDMI” Ȼ “HDMI Output”

You can set the video and audio output settings from 
HDMI OUT MAIN and SUB jacks.

Outputs both of video and audio signals from 
HDMI OUT MAIN jack only.

Outputs video and audio signals from both of 
HDMI OUT MAIN and HDMI OUT SUB jacks.

Outputs video signals from HDMI OUT MAIN jack and 
audio signals from HDMI OUT SUB jack.

 

D Note
•  To enable “HDMI Output”, it is necessary that both 

HDMI OUT MAIN and HDMI OUT SUB jacks are 
connected with other HDMI devices and this unit 
should obtain EDID (Extended Display Identification 
Data).

•  When “HDMI Output” is set to “Main”, there 

will be no output from the HDMI OUT SUB jack.

•  HDMI video resolution will normally be as selected in 

“Video Resolution” except when “HDMI Output” is 
set to “Dual (Main and Sub)” and “Video Resolution” 
is set to “Source Direct” or “Auto”. When the 
unit is set to these settings video and audio from 
HDMI OUT MAIN and SUB jacks will be the same by 
EDID.

•  When playing 3D contents with the unit set to 

“AV Split (Main:V, Sub:A)”, a compatible display device 
and AV receiver/amplifier must be connected to the 
unit. Without a compatible device audio output will 
not occur.

•  When set to “HDMI Output”, unplugging the 

HDMI OUT MAIN or HDMI OUT SUB jack will clear 
settings.

•  Only remove HDMI cables when this unit is in standby 

mode. Do not unplug cables when outputting video 
and audio signals from HDMI OUT MAIN and SUB 
jacks.

•  The video output from HDMI OUT SUB jack and 

the video output which “HDMI Output” is set to 
“Dual (Main and Sub)” are not THX certified.

] Ȼ “Settings” Ȼ “HDMI” Ȼ “Video Resolution”

Set the resolution of the video signal being output from 
the HDMI OUT jack.

You can select the desired “Video Resolution” among the 
settings listed below:
“Auto”, “480i”, “480p”, “720p”, “1080i”, 
“1080p”, “1080p/24”, “Source Direct”.

Actual Output Resolution by Media:

Setting in the 

“Video Resolution”

Source

480i/60

720p/60 1080i/60 720p/24 1080p/24

480i

480i/60

480p

480p/60

720p

720p/60

1080i

1080i/60

1080p

1080p/60

1080p/24

1080p/60

1080p/24

Source Direct

HDMI video resolution will be set to the 
recorded resolution of a playback media.

Auto

The highest or recommended resolution 
supported by your display device will be in 
effect automatically. “Auto” is affected by the 
“HDMI Auto Format” setting.

The table below describes the available output resolution 
when “Video Resolution” is set to “Source Direct”.

Media

Source

480i

480p  720p   1080i  1080p  1080p24 

 BD-video 

Ɛ

Ɛ

Ɛ

Ɛ

Ɛ

Ɛ

AVCHD

Ɛ

Ɛ

Ɛ

Ɛ

Ɛ

–

 DVD-video

Ɛ

–

–

–

–

–

 JPEG

–

Ɛ

Ɛ

–

Ɛ

–

 DLNA Video 

Ɛ

Ɛ

Ɛ

Ɛ

–

–

Ɛ 

: available

– 

: not exist 

•  Composite video output (VIDEO) jack can only output 

480i.

•  For AVCHD, outputting the video in 24 frames per 

second (1080p/24) is not available.

•  Even if “Video Resolution” is set to “Source Direct”, 

HDMI video resolution will be changed when your TV 
is not compatible with the video resolution of a disc 
material.

E5WB0UD_EN_Book.indb   45

E5WB0UD_EN_Book.indb   45

2011/06/02   11:48:22

2011/06/02   11:48:22