ONKYO cr-315 Instruction Manual

Page of 60
 
39
 
Listening to the Radio
 
When tuned into a station, the Tuned 
 indicator 
appears. When tuned into a stereo FM station, the FM ST 
indicator appears as well.
 
Tuning into weak stereo FM stations
 
If the signal from a stereo FM station is weak, it may be
impossible to get good reception. In this case, switch to 
Manual Tuning mode and listen to the station in mono.
 
Adjusting the Antennas
 
Tuning into Radio Stations
YES/MODE
BAND
(     TUN/
TUN     )
    /      
AUTO
FM ST
 
1
 
Press the [BAND] button repeat-
edly to select AM or FM.
 
2
 
Press the [YES/MODE] button 
repeatedly to select Auto or Man-
ual.
 
Auto Tuning  Mode
 
The AUTO indicator appears and ste-
reo radio reception is possible.
 
Manual Tuning  Mode
 
The AUTO indicator is not displayed 
and radio reception will be in mono.
 
3
 
Use the Fast Reverse and Fast For-
ward [
]/[
] buttons to tune 
into a station.
 
In Auto tuning mode, once a station is 
found, tuning stops automatically.
The American model changes FM fre-
quency in 0.2 MHz steps, 10 kHz steps 
for AM. For other models it’s 0.05 MHz 
steps for FM and 9 kHz or 10 kHz steps 
for AM.
In Manual Tuning mode, the frequency 
stops changing when you release the but-
ton. Press the button repeatedly to 
change the frequency one step at a time.
AUTO indicator
1
2
Change the direction of the 
antenna to achieve the best 
reception.
Affix the antenna with a thumbtack. (Do not 
push the thumbtack through the antenna.)
Caution: Be careful not to prick your finger!
Adjusting the AM antenna
Adjust the location and position of the AM 
antenna while listening to an AM station to 
achieve the best reception.
Adjusting and installing the FM antenna
Choose a location for the FM antenna while 
listening to an FM station.
CR515,315_En.book Page 39 Wednesday, June 7, 2006 2:36 PM