ONKYO DR-90 Instruction Manual
18
Before operating your stereo system, you need to set up
the speaker configuration and the distance from the
listening position to each speaker.
the speaker configuration and the distance from the
listening position to each speaker.
Note
It is not necessary to set the parameters again once you have
completed the setup (with one exception*) unless you change the
speaker configuration.
completed the setup (with one exception*) unless you change the
speaker configuration.
* See “To Listen to a High-Frequency/High-Quantization Format
Source in its Original Sound Quality – 96k Sound” on page 40.
Speaker Setup
Press SPEAKER SETUP to display
the subwoofer configuration.
the subwoofer configuration.
The subwoofer configuration appears in
the DVD Receiver's display.
the DVD Receiver's display.
Press MODE ADJ
/
to select
either “YES” (when a subwoofer is
connected) or “NO” (when no
subwoofer is connected).
connected) or “NO” (when no
subwoofer is connected).
If you select “NO,” the configuration of the
front speakers is automatically set to
“LARGE.” In this case, skip the next step
and go to step 4.
front speakers is automatically set to
“LARGE.” In this case, skip the next step
and go to step 4.
Press ENTER, then press MODE
ADJ
ADJ
/
to select either
“LARGE” (when large–wideband–
front speakers are connected) or
“SMALL” (when small–with limited
bass signal handling–front
speakers are connected).
front speakers are connected) or
“SMALL” (when small–with limited
bass signal handling–front
speakers are connected).
Press ENTER, then press MODE
ADJ
ADJ
/
to select either
“LARGE” (when a large center
speaker is connected), “SMALL”
(when a small center speaker is
connected), or “NONE” (when no
center speaker is connected).
speaker is connected), “SMALL”
(when a small center speaker is
connected), or “NONE” (when no
center speaker is connected).
Note
If the front speaker configuration is set to
“SMALL” in step 3, “LARGE” will not appear in
this step.
“SMALL” in step 3, “LARGE” will not appear in
this step.
Press ENTER, then press MODE
ADJ
ADJ
/
to select either
“LARGE” (when large surround
speakers are connected), “SMALL”
(when small surround speakers are
connected), or “NONE” (when no
surround speakers are connected).
speakers are connected), “SMALL”
(when small surround speakers are
connected), or “NONE” (when no
surround speakers are connected).
Note
If the front speaker configuration is set to
“SMALL” in step 3, “LARGE” will not appear in
this step.
“SMALL” in step 3, “LARGE” will not appear in
this step.
Press ENTER, then press MODE
ADJ
ADJ
/
repeatedly to enter the
distance between your listening
position and one of the front
speakers.
position and one of the front
speakers.
• Set the value closest to the actual
distance.
The distance from the listening position
to one of the front speakers must be the
same as the distance to the other
speaker.
The distance from the listening position
to one of the front speakers must be the
same as the distance to the other
speaker.
• To increase the value, press MODE ADJ
.
• To decrease the value, press MODE ADJ
.
• You can select a distance between 0.3 ft.
and 30 ft. (1 and 9 m).
SPEAKER
SETUP
CH L
MODE
2
PRESET /
MODE ADJ
3
4
5
6
ENTER
PRESET /
MODE ADJ
ENTER
PRESET /
MODE ADJ
ENTER
PRESET /
MODE ADJ
ENTER
PRESET /
MODE ADJ
1
D
O
W
N
U
P
DISPLAY
TUNING
SPEAKER
SETUP CH LEVEL
ENTER
PHONES
OFF
ON
STANDBY/ ON
MODE
FM MUTE
PRESET
MEMORY
DOWN
UP
STOP
PAUSE
PLAY
OPEN/CLOSE
TREBLE
BASS
PRESET /
MODE ADJ
MASTER VOLUME
POWER
Re - EQ
SURROUND
MODE
LATE NIGHT
INPUT SELECTOR
STANDBY
F M
A M
T V
TAPE/MD
VIDEO 1
VIDEO 2
DVD
2-8 3-9
1