ONKYO dv-sp502 Instruction Manual

 

46

 

Digital audio is output from the digital outputs. Note that there 
is no digital output when playing SACDs and some DVD-Audio 
discs regardless of this setting.

Off

No digital audio output.

 

Dolby Digital encoded digital audio is output when playing a 
Dolby Digital DVD disc.

Dolby Digital > PCM

Dolby Digital audio is converted to PCM audio before being 
output.

 

DTS encoded digital audio is output when playing a DTS disc. 
(Noise will be output if your amplifier/receiver is not compati-
ble with DTS audio.)

DTS > PCM

DTS audio is converted to PCM audio before being output.

 

96kHz digital audio is converted to 48kHz for digital output. 
Note that High sampling rate DVD-Audio discs (192kHz or 
176.4kHz) automatically output down-sampled audio through 
the digital outputs.

Down Sample Off

96kHz digital audio is output as is at 96kHz.

 

MPEG encoded digital audio is converted to PCM audio for 
digital output.

MPEG

MPEG encoded digital audio is output as is.

 

Set if you have a conventional 4:3 TV. Widescreen movies are 
shown with black bars top and bottom.

4:3 (Pan & Scan)

Set if you have a conventional 4:3 TV. Widescreen movies are 
shown with the sides cropped so that the image fills the 
screen.

16:9 (Wide)

Set if you have a widescreen TV.

 

Progressive

Set if your TV is compatible with progressive scan video (see 
your TV’s instruction manual for details). See also “Switching 
the video output to interlace using the front panel controls” on 
page 21.
Note that progressive scan video is only output from the com-
ponent video jacks.

 

Set if your TV is not compatible with progressive scan video.

 

Ordinary (composite) video output, compatible with all TVs.

S Video

Almost the same quality as RGB, but can give better results if 
you’re using a long SCART cable.

RGB

If your TV is compatible, this setting gives the best picture 
quality.

DV-SP502E_En.book Page 46 Friday, July 16, 2004 3:34 PM